Reference Model: None
These error code explanations can help with troubleshooting a problem with your Maytag Bravos dryer.
Code | Meaning | Possible Cause | Possible Parts |
PF | Power failure | A power failure occurred while the dryer was running. Press Start to continue the cycle or press Stop to clear the display. If this code frequently appears, check the power cord and replace it if it's damaged | Power cord |
F-01 | Main electronic control board failure | Unplug the dryer for 5 minutes and the plug the dryer back in. If the code reappears, replace the main electronic control board | Main electronic control board |
F-02 | User interface keypad failure | A stuck button on the user interface control board causes this code. If you can't free the stuck key, replace the user interface control board | User interface control board |
F-22 | Exhaust thermistor failure | Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it | Thermistor |
F-23 | Exhaust thermistor failure | Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it | Thermistor |
F-26 | Drive motor failure | Unplug the dryer. Check the wiring connections between the main electronic control board and the drive motor. If the wiring connections are sound, replace the drive motor | Drive motor |
F-28 | Moisture sensor failure | Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor | Moisture sensor |
F29 | Moisture sensor failure | Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor | Moisture sensor |
Dryer Repair & Maintenance Parts
Related Links