KitchenAid slide-in electric range error codes:

These error code explanations can help you diagnose a problem with your KitchenAid range.


Code Meaning Possible Cause Possible Parts
1C/6C, 1C/81 or 1C/82 Defective electronic oven control Disconnect power or unplug the range for 3 minutes to reset the electronic oven control. If the error code displays when you restore power, replace the electronic oven control Electronic oven control
1C/7C or 1C/8C Internal electronic oven control error Disconnect power or unplug the range for 3 minutes to reset the electronic oven control. If the error code displays when you restore power, replace the electronic oven control Electronic oven control
1C/1C Stuck key or defective keypad Disconnect power or unplug the range for 3 minutes to reset the electronic oven control. If the error code displays when you restore power, replace the keypad. If the problem persists, replace the electronic oven control Keypad, Electronic oven control
1C/2C Keypad wire harness is unplugged Disconnect power or unplug the range and reconnect the keypad wire harness on the electronic oven control. If the wire harness is already plugged in, it's likely that either the harness or keypad has failed; replace the keypad, which includes the harness. If the problem persists, replace the electronic oven control Keypad, Electronic oven control
1C/31 or 1C/32 Cancel key circuit failure Disconnect power or unplug the range for 3 minutes to reset the electronic oven control. If the error code displays when you restore power, replace the keypad. If the problem persists, replace the electronic oven control Keypad, Electronic oven control
1C/4C Communication failure Disconnect power or unplug the range for 3 minutes to reset the electronic oven control. If the error code displays when you restore power, replace the keypad. If the problem persists, replace the electronic oven control Keypad, Electronic control
3d/11, 3d/12, 3d/21 or 3d/22 Defective oven temperature sensor Disconnect power or unplug the range. Reconnect any loose wires on the oven temperature sensor. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn't 1080 ohms at 70 degrees F, replace the oven temperature sensor. Replace the electronic oven control if the sensor resistance is okay Oven temperature sensor, Electronic oven control, Wire harness
1d/11 or 1d/12 Oven too hot in Bake or Broil mode Disconnect power or unplug the range. Reconnect any loose wires on the oven temperature sensor. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn't 1080 ohms at 70 degrees F, replace the oven temperature sensor. Replace the electronic oven control if the sensor resistance is okay Oven temperature sensor, Electronic oven control, Wire harness
1d/21 or 1d/22 Oven too hot in Clean mode Disconnect power or unplug the range. Reconnect any loose wires on the oven temperature sensor. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn't 1080 ohms at 70 degrees F, replace the oven temperature sensor. Replace the electronic oven control if the sensor resistance is okay Oven temperature sensor, Electronic oven control, Wire harness
4d/11, 4d/12, 4d/51 or 4d/52 Oven door and oven door lock switches disagree If the oven light doesn't turn on and off when you open and close the oven door, replace the oven door switch. If the light works correctly, disconnect power or unplug the range and then reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Replace the door lock assembly if visibly damaged Oven door switch, Oven door lock assembly, Wire harness
9d/11, 9d/12, 9d/21 or 9d/22 Oven door lock assembly defective Disconnect power or unplug the range. Reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Replace the door lock assembly if visibly damaged Oven door lock assembly, Wire harness
9d/31 or 9d/32 Oven door lock assembly error in Clean mode Disconnect power or unplug the range. Reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Replace the door lock assembly if visibly damaged Oven door lock assembly, Wire harness


KitchenAid Range / Cooktop / Oven Parts

Related Links

  1. KitchenAid Range / Cooktop / Oven Latch, Catch, Lock Parts
  2. KitchenAid Range / Cooktop / Oven Parts
  3. KitchenAid Range / Cooktop / Oven Burner & Related Parts