Dacor range error codes:

These error code explanations can help you diagnose a problem with your Dacor freestanding range.


Code Meaning Possible Cause Possible Parts
F0 Clock button on the key panel is stuck Press the Clock button to free it. If it remains stuck, replace the control key panel Control key panel
F1 Element relay on the electronic oven control board is stuck Disconnect electrical power or unplug the range for 3 minutes to reset the electronic oven control board. Restore power. If the code returns, replace the electronic oven control board Electronic oven control board
F2 Oven over-temperature A relay on the electronic oven control board is stuck, or a sensor failed, or there's a short in the oven heating circuit. Might need to call a service technician to diagnose and repair the problem Electronic oven control board, Sensor, Oven heating circuit components
F3 Oven temperature sensor is defective (short in the sensor circuit) Disconnect electrical power or unplug the range. Reconnect any loose wires on the oven temperature sensor wire harness. Replace the wire harness if damaged. Using a volt/ohm meter to measure the oven temperature sensor resistance. If the resistance is not 1100 ohms at room temperature, replace the oven temperature sensor. If the oven temperature sensor resistance is okay, replace the electronic oven control Oven temperature sensor, Wire harness, Electronic oven control board
F4 Oven temperature sensor is defective (electrically open sensor circuit) Disconnect electrical power or unplug the range. Reconnect any loose wires on the oven temperature sensor wire harness. Replace the wire harness if damaged. Using a volt/ohm meter to measure the oven temperature sensor resistance. If the resistance is not 1100 ohms at room temperature, replace the oven temperature sensor. If the oven temperature sensor resistance is okay, replace the electronic oven control Oven temperature sensor, Wire harness, Electronic oven control board
F6 Defective electronic oven control board (only time of day and timer will operate) Disconnect electrical power or unplug the range for 3 minutes to reset the electronic oven control board. Restore power. If the code returns, replace the electronic oven control board Electronic oven control
F7 or F8 Defective oven door lock circuit Disconnect power or unplug the range. Reconnect any loose wires in the oven door lock assembly wire harness. Replace the wire harness if damaged. Check the door lock assembly for visible damage and replace it if broken Oven door lock assembly, Wire harness


Range / Cooktop / Oven Repair and Maintenance Parts

Related Links

  1. Dacor dishwasher error codes
  2. Dacor Refrigerator Parts